top of page
CONNECT TO YOUR CAD SYSTEM BY USB OR NETWORK
A floppy drive can be replaced with a USB / floppy emulator. CX-9000, CX-9010, and TurboCam controls
will all accept this change. It will format a USB stick into many floppy sized partitions that can each be selected by
push button. A desktop USB computer will access the root 1.44mb partition directly.
If the USB / floppy driver software is installed, it will access all the partitions.
NETWORKING
Excellon gave away PCDNC, a single machine file server.
A batch file on the CX-9000 or CX-9010 will allow a remote search and
program transfer over an RS-232 cable from your network computer.
bottom of page