TURBO CAM AND TERA 4031 CONTROLLERS SUPPORTED

Most operating PDA machines have the Turbo Cam controller.  It was original equipment on the newer machines and

retrofitted to many older models. This is a reliable Pentium  based control with either a Disk-On-Chip or

Compact Flash solid state hard drive. An older version of this control is the Camstar with a 486 PC

Tera 4031 controls were used on some older PDA machines.

Left unsupported are PMC, Spectrum, and General Automation controls.

(909) 239-9288

©2020 by CAPLETTE TECHNICAL, Inc.